Aluminum alloy wafers are products after preliminary processing of aluminum raw materials, which are mixed with manganese-magnesium alloy during processing to enhance all aspects of the alloy’s characteristics. As a semi-finished aluminum alloy, aluminum wafers are loved by many manufacturers of kitchenware, transportation supplies, and machinery. It is the most common semi-finished aluminum alloy raw material for many daily necessities.
Huawei Aluminum is the Chinese factory that provides such aluminum wafers to all over the world.
Aluminum wafer-as the name implies is an aluminum alloy sheet with a certain diameter and thickness. Wafers are often made of aluminum alloy plates after being stretched and cut. Generally speaking, the things that manufacturers have to do are different, and the requirements for the size of the aluminum wafer-the diameter of the wafer are also different. Our aluminum discs suppliers must also be able to meet the cutting requirements of different sizes, and produce different sizes (aluminum wafer diameters) according to production requirements.
Compared with other metals, aluminum, which is commonly used in the production of aluminum wafers, has many commendable properties. 1. Low alloy density: lightweight, only 1/3 of iron or copper. 2. High strength Aluminum and aluminum alloy have high strength. A certain degree of cold working can strengthen the strength, and some types of aluminum alloys can also be strengthened by heat treatment. 3. Good electrical and thermal conductivity: second only to silver, copper, and gold. 4. Good corrosion resistance: the aluminum surface is easy to naturally produce aluminum oxide protective film, which can well protect the substrate from corrosion. In addition, good casting performance can be obtained through artificial anodization and coloring.
Generally speaking, Our 1050 aluminum circle, 1060 aluminum circle, 1070 aluminum circle, 1100 aluminum circle, 8011 aluminum circles, 3003 aluminum sheet circle, 3105 aluminum circle ect alloy Diameter range is 20mm-1200mm, So these alloys all can do 24″ aluminum round discs.
1. Fully-automatic numerical control, no manual contact is required between the unwinding of the coil and the complete blanking of the entire coil, and no adjustment is required. This eliminates the hidden dangers of production safety and product quality caused by ordinary punching. 2. Use coil material to directly produce wafers without slitting and cross-cutting, which reduces costs and damages. The wafers produced are free of oil stains and scratches. 3. Make full use of the width of the roll material and control it with a high-precision servo motor drive system to minimize the distance between the wafer and the edge of the wafer. 4. The production can reach 40-55 pieces per minute, which improves the production efficiency.
Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:
Ingot/Master Alloys — Melting Furnace – Holding Furnace — D.C. Caster — Slab —- Scalper — Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace — Final Inspection – Packing — Delivery
Assurance Below inspection will be done in the production.
1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.
2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.
Aluminum circles can be packed by export standards, covering with brown paper and plastic film. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.
Aluminum circle of Henan Huawei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ needs. What’s more, a wooden case or wooden pallet is adopted to protect products from damage during delivery. There are two kinds of packaging, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.
In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More …