Aluminum Disc Circle For Spinning Introduce

The spinning aluminum circle disc is to rotate the force point of the aluminum circle from point to the line from line to surface, and at the same time apply a certain pressure in a certain direction of the wafer, so that the metal material deforms and flows in this direction, and is formed into the desired shape. Spinning aluminum circle alloys must have plastic deformation or flow properties, and spinning forming is not equivalent to plastic deformation. Warwick Aluminum has perfectly mastered this spinning process to provide high-quality aluminum wafers.

Aluminum Circle For Spinning

Huawei Aluminum Circle Disc Production Guarantee

Henan Huawei Aluminum is a professional manufacturer of spinning aluminum ring products, with advanced production equipment in the world, which can produce high-quality spinning aluminum rings. Our aluminum round products can control the defects related to the spinning process. After rotating, the outer edge of the part will appear as a bump (commonly known as a raised ear). Our aluminum ring can control earplug defects within 5%.

Aluminum Circles Features:

  1. Alloy 1050 1060 1100 3003 aluminium circles, deep drawing quality, good spinning quality, excellent forming and anodizing, no four ears.
  2. Excellent reflectivity, good for Polishing.
  3. Good anodized quality, suitable for hard anodizing and enameling
  4. Clean surface and smooth edge, hot rolled quality, fine grains, and after deep drawing no looper lines
  5. Excellent pearl color anodizing.

Huawei aluminum is professional manufacturers of Spinning Aluminium circle products, has advanced manufacturer equipment, can produce high-quality aluminium circles. Our aluminium engineers traveled so far throughout the world to find out from our customers which import so good spinning quality aluminium circle. To keep good spinning quality, we have to identify two aspects :

Looper line is shaped lines after spinning. They look like smiley faces. Our aluminium circle products could control this defect associated with the spinning process. It appears as bumps ( or ears ) on the outside rim of the part after spinning. Our aluminum circle round control earing to within 5%.

And our high-quality spinning aluminum circles are mainly used for: Éclairage, Ventilation, Satellite, Paint Sprayers, Central Vacuum Units, Filter Cartridges, Planters, Waste Recepticles, Drip Pans, Cryogenic Tankers, Race Car Wheels, etc..

Aluminum Circles Usage Scenarios

Huawei Aluminum high-quality spinning aluminum ring is mainly used for: lighting, ventilation, paint spraying machine, central vacuum device, filter element, flower pot, waste container, drip tray, low-temperature tanker, traffic sign, etc..

Properties of the aluminum circle:

Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:

  • Low anisotropy, which facilitates deep drawing
  • Strong mechanical properties
  • High and homogeneous heat diffusion
  • Ability to be enameled, covered by PTFE (or others), anodized
  • Good reflectivity
  • High strength-to-weight ratio
  • Durability and resistance to corrosion

Aluminum Circles Process

Ingot/Master AlloysMelting Furnace – Holding FurnaceD.C. CasterSlab —- ScalperHot Rolling Mill – Cold Rolling Mill – Punching – Annealing FurnaceFinal Inspection – PackingDelivery

  • Prepare the master alloys
  • Melting furnace: put the alloys into the melting furnace
  • D.C.cast aluminum ingot: To make the mother ingot
  • Mill the aluminum ingot: to make the surface and side smooth
  • Heating furnace
  • Hot rolling mill: made the mother coil
  • Colding rolling mill: the mother coil was rolled as the thickness you want to buy
  • Punching process: become the size what you want
  • Annealing furnace: change the temper
  • Final inspection
  • Packing: wooden case or wooden pallet
  • Delivery

Quality Control

Assurance Below inspection will be done in the production.

  • a. ray detectionRT;
  • b. ultrasonic testingUT;
  • c. Magnetic Particle Testing-MT;
  • d. penetration testing-PT;
  • e. eddy current flaw detection-ET

1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.

2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.

Aluminum discs packing:

Aluminum circles can be packed by export standards, covering with brown paper and plastic film. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.

  • Put the driers side the aluminum circle, keep the products dry and clean.
  • Use clean plastic paper, pack the aluminium circle, keep good sealing.
  • Use the snakeskin paper, pack the surface of the plastic paper, keep good sealing.
  • Next, there are two ways of packaging: One way is wooden pallet packaging, using the crusty paper packing the surface; Another way is wooden case packaging, using the wooden case packing the surface.
  • Finally, lay the steel belt on the wooden box’s surface, keeping the wooden box fastness and secure.

Aluminum circle of Henan Huawei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ needs. What’s more, a wooden case or wooden pallet is adopted to protect products from damage during delivery. There are two kinds of packaging, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.


Why choose us?

In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More