1. Bottom
Wooden trays can’t have bark eyes or mildew.
ถ้าด้านบนของพาเลทเป็นแถบไม้, it needs to be padded with a cardboard or wooden board, จากนั้นชั้นของแผ่นพลาสติก, จากนั้นกระดาษคราฟท์กันน้ำ, และในที่สุดก็เป็นชั้นของผ้าฝ้ายมุก (ติดต่อแผ่นอลูมิเนียม).
(ขนาดของกระดาษแข็งเหมือนกับของถาด, และ Epe ด้านล่าง, กระดาษคราฟท์กันน้ำ, and plastic sheet wrap the aluminum circle and fold it along the sidewall to ensure that the aluminum circle is not exposed).
2. Side
Close to the aluminum disc is a layer of pearl cotton, followed by a layer of waterproof kraft paper, and a layer of plastic cloth on the outside.
(Requires complete encapsulation of the aluminum disc and a good seal on top).

3. Internal
Add paper space between aluminum discs, put cardboard space between each stack, and put enough desiccant.

4. Exterior and top
On the outermost side, wrap a layer of kraft paper around the edges, seal the port with tape, and stretch it with wrapping film.
Add a layer of wood to the top of the well-sealed package, the size of which is the same as the bottom tray.
5. Steel belt
ในที่สุด, the outside of the package is marked with a tic-tac-toe steel belt. Cardboard corner guards are required at the corners of the packaging. See below.
Along the direction of the dunnage, the steel belt is punched twice on the dunnage and on the inside of the dunnage. Then make two more strokes along its vertical direction.

6. Neutral labels
Easy to replace later.