Was ist ein Aluminiumscheibenkreis für die Küche?
Aluminum disc circle for kitchen is an aluminum material commonly used to make kitchen utensils. It is usually made of pure aluminum or aluminum alloy material, disc-shaped or round in shape, and has various diameters and thicknesses.
The main use of kitchen aluminum discs is to make a variety of cookware and cooking utensils, such as pans, woks, bakeware, and pressure cookers. This is because the aluminum disc has good thermal conductivity and uniform heat conduction performance, Dadurch kann die Wärme schnell übertragen und das Essen gleichmäßig erhitzt werden.
Zusätzlich, Aluminiumscheiben für die Küche haben auch den Vorteil, dass sie leicht sind, einfache Verarbeitung und einfache Reinigung, was es zu einem unverzichtbaren Material bei der Herstellung von Kochgeschirr und Kochutensilien macht.
Aluminiumscheibenkreis für die Küche
Modell aus Aluminiumlegierung
- 1xxx: Plastizität und Leitfähigkeit, aber geringe Festigkeit, Wird hauptsächlich zur Herstellung von Verpackungsmaterialien wie Dosen verwendet.
- 3xxx: Korrosionsbeständigkeit und Schweißbarkeit, hauptsächlich zur Herstellung von Küchenutensilien verwendet, dekorative Materialien, usw.
- 5xxx: hohe Festigkeit, gute Korrosionsbeständigkeit, gute Plastizität und Schweißbarkeit, hauptsächlich zur Herstellung von Küchenutensilien verwendet, Schiffe, Autos, usw.
- 6xxx: hohe Festigkeit, gute Bearbeitbarkeit, gute Korrosionsbeständigkeit, Wird hauptsächlich zur Herstellung verschiedener Strukturteile verwendet, Karosserieteile, usw.
- 8xxx: mit spezifischen physikalischen Eigenschaften und Anwendungsgebieten.
Verarbeitungstechnologie
- Material vorbereitung: Wählen Sie das entsprechende Aluminiumlegierungsmaterial, und je nach Bedarf in Platten entsprechender Größe schneiden.
- Formendesign: Je nach gewünschter Größe und Form der Aluminiumscheibe, Entwerfen Sie die entsprechende Form.
- Stanzformen: Die Aluminiumplatte wird auf die Stanzmaschine gelegt, and the aluminum plate is punched into the required shape through the stamping die to obtain the aluminum disc.
- Edge pressing: Place the aluminum disc on the edge pressing machine to press the edge of the aluminum disc to make it smooth.
- Polishing treatment: Use a polishing machine to polish the aluminum disc to make its surface smooth.
- Cleaning and packaging: Clean the oil and impurities on the surface of the aluminum wafer, then pack and mark.
surface treatment
Oxidation treatment:
soak the aluminum disc in the oxidation solution to form an oxide film on the surface.
The oxide film has a certain hardness and corrosion resistance, which can protect the surface of the aluminum wafer from oxidation, corrosion and scratches.
Anti-corrosion coating:
Coating the surface of the aluminum disc with a layer of anti-corrosion coating, such as epoxy resin, polyamide, etc., can improve its corrosion resistance and wear resistance.
Sand blasting treatment:
Spray the surface of the aluminum disc with sand particles to make the surface rough, which has certain anti-slip and decorative properties.
Surface treatment of aluminum disc circle for kitchen
Polishing treatment:
Die Oberfläche der Aluminiumscheibe wird durch mechanische oder chemische Verfahren poliert, um die Oberfläche spiegelglatt zu machen und eine gute dekorative Wirkung zu erzielen.
Elektrochemisches Polieren:
Auf der Oberfläche von Aluminiumscheiben werden durch elektrochemische Verfahren Mikrokratzer erzeugt, um die Oberfläche glatt und gleichmäßig zu machen, das bestimmte Korrosionsschutz- und dekorative Eigenschaften aufweist.
Properties of the aluminum circle:
Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:
- Low anisotropy, which facilitates deep drawing
- Strong mechanical properties
- High and homogeneous heat diffusion
- Ability to be enameled, covered by PTFE (or others), anodized
- Good reflectivity
- High strength-to-weight ratio
- Durability and resistance to corrosion
Aluminum Circles Process
Ingot/Master Alloys — Melting Furnace – Holding Furnace — D.C. Caster — Slab —- Scalper — Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace — Final Inspection – Packing — Delivery
- Prepare the master alloys
- Melting furnace: put the alloys into the melting furnace
- D.C.cast aluminum ingot: To make the mother ingot
- Mill the aluminum ingot: to make the surface and side smooth
- Heating furnace
- Hot rolling mill: made the mother coil
- Colding rolling mill: the mother coil was rolled as the thickness you want to buy
- Punching process: become the size what you want
- Annealing furnace: change the temper
- Final inspection
- Packing: wooden case or wooden pallet
- Delivery
Quality Control
Assurance Below inspection will be done in the production.
- a. ray detection—RT;
- b. ultrasonic testing—UT;
- c. Magnetic Particle Testing-MT;
- d. penetration testing-PT;
- e. eddy current flaw detection-ET
1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.
2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.
Aluminum discs packing:
Aluminum circles can be packed by export standards, covering with brown paper and plastic film. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.
- Put the driers side the aluminum circle, keep the products dry and clean.
- Use clean plastic paper, pack the aluminium circle, keep good sealing.
- Use the snakeskin paper, pack the surface of the plastic paper, keep good sealing.
- Next, there are two ways of packaging: One way is wooden pallet packaging, using the crusty paper packing the surface; Another way is wooden case packaging, using the wooden case packing the surface.
- Finally, lay the steel belt on the wooden box’s surface, keeping the wooden box fastness and secure.
Aluminum circle of Henan Huawei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ needs. What’s more, a wooden case or wooden pallet is adopted to protect products from damage during delivery. There are two kinds of packaging, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.
Why choose us?
In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More …
