주방용 알루미늄 디스크 서클은 무엇인가요?
주방용 알루미늄 디스크 서클은 주방 용품을 만드는 데 일반적으로 사용되는 알루미늄 소재입니다.. 일반적으로 순수한 알루미늄 또는 알루미늄 합금 재질로 만들어집니다., 디스크 모양 또는 둥근 모양, 다양한 직경과 두께를 가지고 있으며.
주요 용도 주방 알루미늄 디스크 is to make a variety of cookware and cooking utensils, such as pans, woks, bakeware, and pressure cookers. This is because the aluminum disc has good thermal conductivity and uniform heat conduction performance, which can quickly transfer heat and make the food evenly heated.
게다가, kitchen aluminum discs also have the advantages of lightness, easy processing and easy cleaning, which make it one of the indispensable materials in the manufacture of cookware and cooking utensils.
aluminum disc circle for kitchen
Aluminum alloy model
- 1xxx: plasticity and conductivity, but low strength, mainly used to make packaging materials such as cans.
- 3xxx: corrosion resistance and weldability, mainly used to make kitchen utensils, decorative materials, 등.
- 5xxx: high strength, good corrosion resistance, good plasticity and weldability, mainly used to make kitchen utensils, ships, cars, 등.
- 6xxx: high strength, good machinability, good corrosion resistance, mainly used to make various structural parts, body panels, 등.
- 8xxx: with specific physical properties and application fields.
Processing technology
- Material preparation: choose the appropriate aluminum alloy material, 그리고 적당한 크기로 접시에 썰어주세요.
- 금형 설계: 알루미늄 디스크의 필요한 크기와 모양에 따라, 해당 금형을 설계.
- 스탬핑 성형: 알루미늄 판이 펀칭기에 놓여 있습니다., 알루미늄 판은 스탬핑 다이를 통해 필요한 모양으로 펀칭되어 알루미늄 디스크를 얻습니다..
- 가장자리 누르기: 알루미늄 디스크를 가장자리 누르는 기계에 놓고 알루미늄 디스크의 가장자리를 눌러 매끄럽게 만듭니다..
- 연마 처리: Use a polishing machine to polish the aluminum disc to make its surface smooth.
- Cleaning and packaging: Clean the oil and impurities on the surface of the aluminum wafer, then pack and mark.
surface treatment
Oxidation treatment:
soak the aluminum disc in the oxidation solution to form an oxide film on the surface.
The oxide film has a certain hardness and corrosion resistance, which can protect the surface of the aluminum wafer from oxidation, corrosion and scratches.
Anti-corrosion coating:
Coating the surface of the aluminum disc with a layer of anti-corrosion coating, such as epoxy resin, polyamide, etc., can improve its corrosion resistance and wear resistance.
Sand blasting treatment:
Spray the surface of the aluminum disc with sand particles to make the surface rough, which has certain anti-slip and decorative properties.
Surface treatment of aluminum disc circle for kitchen
연마 처리:
알루미늄 디스크의 표면은 기계적 또는 화학적 방법으로 연마되어 표면이 거울처럼 매끄럽고 장식 효과가 좋습니다..
전기화학적 연마:
알루미늄 디스크 표면에 전기화학적 방법으로 미세한 스크래치를 형성하여 표면을 매끄럽고 균일하게 만듭니다., 특정 부식 방지 및 장식 특성을 가지고 있습니다..
Properties of the aluminum circle:
Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:
- Low anisotropy, which facilitates deep drawing
- Strong mechanical properties
- High and homogeneous heat diffusion
- Ability to be enameled, covered by PTFE (or others), anodized
- Good reflectivity
- High strength-to-weight ratio
- Durability and resistance to corrosion
Aluminum Circles Process
Ingot/Master Alloys — Melting Furnace – Holding Furnace — D.C. Caster — Slab —- Scalper — Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace — Final Inspection – Packing — Delivery
- Prepare the master alloys
- Melting furnace: put the alloys into the melting furnace
- D.C.cast aluminum ingot: To make the mother ingot
- Mill the aluminum ingot: to make the surface and side smooth
- Heating furnace
- Hot rolling mill: made the mother coil
- Colding rolling mill: the mother coil was rolled as the thickness you want to buy
- Punching process: become the size what you want
- Annealing furnace: change the temper
- Final inspection
- Packing: wooden case or wooden pallet
- Delivery
Quality Control
Assurance Below inspection will be done in the production.
- a. ray detection—RT;
- b. ultrasonic testing—UT;
- c. Magnetic Particle Testing-MT;
- d. penetration testing-PT;
- e. eddy current flaw detection-ET
1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.
2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.
Aluminum discs packing:
Aluminum circles can be packed by export standards, covering with brown paper and plastic film. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.
- Put the driers side the aluminum circle, keep the products dry and clean.
- Use clean plastic paper, pack the aluminium circle, keep good sealing.
- Use the snakeskin paper, pack the surface of the plastic paper, keep good sealing.
- Next, there are two ways of packaging: One way is wooden pallet packaging, using the crusty paper packing the surface; Another way is wooden case packaging, using the wooden case packing the surface.
- Finally, lay the steel belt on the wooden box’s surface, keeping the wooden box fastness and secure.
Aluminum circle of Henan Huawei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ needs. What’s more, a wooden case or wooden pallet is adopted to protect products from damage during delivery. There are two kinds of packaging, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.
Why choose us?
In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More …
