Aluminum wafer are common in our life, sealed cans, non-stick frying-pan, traffic signs, lamps and lanterns and so on has the figure of aluminum wafer lampshade, in addition to aluminum wafer in machinery manufacturing, automotive and other industrial areas, every action, so the aluminum round priority when the choose and buy is use, USES decision is to buy hot rolled or roll casting material, roll material is ma ...
Aluminum Circle Disc Order Overview： Alloy NO. 3000 ชุด: A3003 A3004 A3005 A3105 A3A21 and other 3000 series Temper O\H12\H14\H16\H18\H22\H24\H26 Specification Thickness: 0.3mm--6mm Diameter: 50mm--1500mm Surface treatment coated, polished, embossed, etc Colors Silver, or as per customer’s requirement Features High weather resistance\ anti-scratch anticorrosion\ easy proc ...
Aluminum Circle Disc Wafer Overview Aluminum alloy discs are widely used in industry and our daily lives. The most relevant thing in our daily life is that many kitchen utensils are processed from aluminum alloy raw materials, such as stainless bowls, non-stick pans, and containers. Utensils, plates, ฯลฯ. Parameters Of Aluminum Disc Circle For Cookware Alloys: 1050, 1060 ฯลฯ 1. Alloy: 1100, 1050, 1060, 1070 ...
Cold Rolled Aluminium Disc Circle Overview Cold-rolled aluminum wafer refers to the use of hot-rolled aluminum coil as raw material. After surface treatment, the metal is cold-rolled below the recrystallization temperature. The finished product is a hard-rolled coil. In this way, the hardness of the aluminum wafer can be improved. , But it will also be accompanied by deterioration of metal plasticity. Aluminum ...
Aluminium Circle Deep Drawing Overviews: Our common processed aluminum wafers and aluminum alloys are materials with good deep-drawing processing performance and are widely used in deep-drawing processing. Deep-drawing processing is simply to punch the center part of the material with a punch. The flange part is subjected to compression force in the circumferential direction and tensile force in the radial dire ...
5754 Alloy Aluminum Circle Chemical Composition: Chromium (CR) 0.15-0.35% Copper (Cu) 0.1% max Magnesium (Mg) 2.2-2.8% Manganese (Ms) 0.1% max Silicon (Si) & Iron (Fe) 0.45% max Zinc (Zn) 0.1 max 5754 Aluminum Circle Specification Tolerances Blanked and Sheared Circle Products Thickness(mm) Diameter Range (D)(mm) 0.5-4.5 D ≤ 455 455< D ≤ ...
3000 Series Aluminum Disc Circle Overview 3 series aluminium alloy consists of manganese as the main component. The content is between 1.0-1.5, used in industries and products with high requirements for rust prevention. The aluminum circle made of 3 series aluminum alloy has higher strength than pure aluminum alloy. Although the product performance cannot be strengthened by heat treatment, it can be processed ...
Aluminum circles are widely used in electronics, daily chemicals, medicine, culture and education, and automotive accessories. Electrical appliances, thermal insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries. Such as kitchen utensils such as non-stick pans, pressure cookers, ฯลฯ. and hardware supplies such as lampshades, water heater shells, st ...
As an aluminum alloy raw material with good processing performance, aluminum Circle Disc will also have different processing tempering states according to different alloy states. This paper takes O, H12, H14, and H18 as examples to discuss the differences among several states. 1050 Aluminum Circle Disc O: It represents that the 1050 aluminum Circle DISC produced is a fully annealed aluminum circle, which is al ...
Aluminum products are more and more widely used in daily life, followed by the increasing demand for raw materials of aluminum products. The penetration rate of aluminum ring production, one of them, has skyrocketed. Aluminum rings can be used to make a variety of end products, such as common cookware, lighting, satellite dishes, car rims, floats, fuel tanks, ฯลฯ. The size of aluminum circles can be large or s ...
what is the basic requirements for aluminium circles? As a skilled aluminum worker, in the process of producing aluminum/aluminium circle need to understand the basic production product and process. Automatic blanking production line for processing of high quality aluminum circles are as follows: Aluminum circle plate open-book blanking production line, aluminum is a circle production equipment, fully au ...
1xxx series aluminum circle disc features Corrosion resistance Excellent formability Excellent welding characteristics Excellent ductility Excellent corrosion resistance excellent electrical conductivity high durability excellent finish high strength 1xxx series aluminum circle disc application • Good surface, suitable for the lighting industry. • Applications of our products: ...