Qu'est-ce qu'un cercle en aluminium pour l'électronique?

Cercle en aluminium pour l'électronique est l'un des composants utilisés dans les équipements électroniques, généralement utilisé pour la connexion ou la fixation de composants électroniques.

Le cercle en aluminium a généralement des propriétés conductrices et peut être utilisé pour les connexions de circuits et peut également être utilisé comme structure de support pour les plaques conductrices..

The shape and size of the aluminium circle can be designed and manufactured according to specific application requirements, such as packaging chips, connecting circuit boards, fixing components, etc..

En outre, the lightness, ease of processing, and low cost of aluminum circles make them widely used in the electronics industry.

Cercle en aluminium pour l'électronique

Cercle en aluminium pour l'électronique

What alloy type is used for electronic aluminum circle

The aluminum alloy models commonly used for the electronic aluminium circles are pure aluminum or the 1000 series and 3000 série dans la série en alliage d'aluminium.

En effet, ces alliages d'aluminium ont les caractéristiques d'une conductivité électrique élevée., bonnes performances de traitement, et soudure facile, et sont très adaptés à une utilisation dans les composants électroniques.

Parmi eux, le 1000 série l'alliage d'aluminium présente les caractéristiques d'une grande pureté, bonne plasticité, et faible résistance, et est souvent utilisé pour fabriquer des composants électroniques de haute précision; tandis que le 3000 série l'alliage d'aluminium a une certaine résistance et une bonne résistance à la corrosion, et est également utilisé dans les composants électroniques. L'un des matériaux en alliage d'aluminium couramment utilisés.

Propriétés mécaniques du cercle en aluminium pour l'électronique

Résistance à la traction60-150 MPa
Limite d'élasticité40-120 MPa
Élongation15%-40%
Dureté20-60HB
Résistance aux chocs1.5-2.5 J/cm2

Properties of the aluminum circle:

Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:

  • Low anisotropy, which facilitates deep drawing
  • Strong mechanical properties
  • High and homogeneous heat diffusion
  • Ability to be enameled, covered by PTFE (or others), anodized
  • Good reflectivity
  • High strength-to-weight ratio
  • Durability and resistance to corrosion

Aluminum Circles Process

Ingot/Master AlloysMelting Furnace – Holding FurnaceD.C. CasterSlab —- ScalperHot Rolling Mill – Cold Rolling Mill – Punching – Annealing FurnaceFinal Inspection – PackingDelivery

  • Prepare the master alloys
  • Melting furnace: put the alloys into the melting furnace
  • D.C.cast aluminum ingot: To make the mother ingot
  • Mill the aluminum ingot: to make the surface and side smooth
  • Heating furnace
  • Hot rolling mill: made the mother coil
  • Colding rolling mill: the mother coil was rolled as the thickness you want to buy
  • Punching process: become the size what you want
  • Annealing furnace: change the temper
  • Final inspection
  • Packing: wooden case or wooden pallet
  • Delivery

Quality Control

Assurance Below inspection will be done in the production.

  • a. ray detectionRT;
  • b. ultrasonic testingUT;
  • c. Magnetic Particle Testing-MT;
  • d. penetration testing-PT;
  • e. eddy current flaw detection-ET

1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.

2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.

Aluminum discs packing:

Aluminum circles can be packed by export standards, recouvrir de papier kraft et de film plastique. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.

  • Put the driers side the aluminum circle, keep the products dry and clean.
  • Use clean plastic paper, pack the aluminium circle, keep good sealing.
  • Use the snakeskin paper, pack the surface of the plastic paper, keep good sealing.
  • Next, there are two ways of packaging: One way is wooden pallet packaging, using the crusty paper packing the surface; Another way is wooden case packaging, using the wooden case packing the surface.
  • Finally, lay the steel belt on the wooden box’s surface, keeping the wooden box fastness and secure.

Aluminum circle of Henan Huawei Aluminum. répondre à la norme d'exportation. Plastic film and brown paper can be covered at customers’ needs. De plus, a wooden case or wooden pallet is adopted to protect products from damage during delivery. Il existe deux types d'emballage, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.

201871711520504

Why choose us?

In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More