Menene da'irar aluminum don kayan lantarki?

Aluminum da'irar don kayan lantarki yana daya daga cikin abubuwan da ake amfani da su a cikin kayan lantarki, yawanci ana amfani da su don haɗi ko gyara kayan aikin lantarki.

Aluminum da'irar yawanci suna da kaddarorin sarrafawa kuma ana iya amfani da su don haɗin da'ira kuma ana iya amfani da su azaman tsarin tallafi don faranti.

Siffa da girman da'irar aluminium za a iya tsarawa da kerawa bisa ga takamaiman buƙatun aikace-aikacen, irin su guntun marufi, haɗa allon kewayawa, gyara abubuwa, da dai sauransu.

Bugu da kari, haske, sauƙi na sarrafawa, da ƙananan farashin da'irori na aluminum ya sa ana amfani da su sosai a cikin masana'antar lantarki.

Aluminum da'irar don kayan lantarki

Aluminum da'irar don kayan lantarki

Wani nau'in gami da ake amfani da shi don da'irar aluminum ta lantarki

Samfuran gami na aluminium da aka saba amfani da su don da'irar aluminium na lantarki tsantsar aluminum ne ko kuma 1000 jerin kuma 3000 jerin a cikin aluminum gami jerin.

Wannan shi ne saboda waɗannan allunan aluminium suna da halayen haɓakar wutar lantarki, aiki mai kyau aiki, da sauƙi waldi, kuma sun dace sosai don amfani da kayan aikin lantarki.

Tsakanin su, da 1000 jerin aluminum gami yana da halaye na high tsarki, filastik mai kyau, da ƙananan ƙarfi, kuma galibi ana amfani dashi don yin ingantattun kayan aikin lantarki; yayin da 3000 jerin aluminum gami yana da wani ƙarfi da kuma mai kyau lalata juriya, kuma ana amfani dashi a cikin kayan aikin lantarki. Ɗaya daga cikin abubuwan da aka saba amfani da su na aluminum.

Kayan injina na da'irar aluminium don kayan lantarki

Ƙarfin ƙarfi60-150 MPa
Ƙarfin Haɓaka40-120 MPa
Tsawaitawa15%-40%
Tauri20-60HB
Taurin tasiri1.5-2.5 J/cm2

Abubuwan da'irar aluminum:

Aluminum da'irar ya dace da kasuwanni da yawa, ciki harda kayan girki, masana'antun kera motoci da haske, da dai sauransu., godiya ga kyawawan halaye na samfur:

  • Ƙananan anisotropy, wanda ke sauƙaƙe zane mai zurfi
  • Strong inji Properties
  • Babban kuma daidaituwa zafi watsawa
  • Ability don enameled, rufe da PTFE (ko kuma wasu), anodized
  • Kyakkyawan tunani
  • Babban ƙarfi-zuwa nauyi rabo
  • Dorewa da juriya ga lalata

Tsarin Da'irar Aluminum

Ingot/Master Alloys — Narka wutar makera - Riƙe wutar makera — D.C. Caster — Wuri —- Scalper — Dandalin Rolling Hot - Mill Rolling Mill - Punching - Annealing Furnace — Binciken Ƙarshe - Shiryawa — Bayarwa

  • Shirya babban allo
  • Narka wutar makera: sanya gami a cikin tanderun narkewa
  • DC watsa aluminum aluminum: Don sa uwar ingot
  • Rufe murfin aluminum: don yin farfajiya da gefen santsi
  • Tanderun dumama
  • Abin birgima: ya sanya uwar murɗa
  • Colding mirgina niƙa: an mirgine murfin uwa azaman kaurin da kuke son siyan
  • Tsarin bugun: zama girman abin da kuke so
  • Ƙona wutar makera: canza yanayin
  • Binciken ƙarshe
  • Shiryawa: akwati na katako ko pallet na katako
  • Bayarwa

Ikon Kulawa

Tabbatarwa da ke ƙasa dubawa za a yi a cikin samarwa.

  • a. gano hasken haske—RT;
  • b. ultrasonic gwaji—UT;
  • c. Gwajin Magnetic Barbashi-MT;
  • d. gwajin shiga-PT;
  • e. Gano aibi na yanzu-ET

1) Ka zama 'yanci daga Tabon Mai, Haushi, Hada, Scratches, Tabo, Discoloration Oxide, Karya, Lalata, Roll Marks, Datti Streaks, da sauran lahani waɗanda zasu kawo cikas ga amfani.

2) Surface ba tare da layin baki ba, yanke tsafta, tabo na lokaci-lokaci, nadi bugu lahani, kamar sauran ka'idojin Gudanar da ciki na gko.

Aluminum fayafai shiryawa:

Za a iya tattara da'irar aluminium ta ma'aunin fitarwa, sutura da takarda mai launin ruwan kasa da fim ɗin filastik. Daga karshe, An gyara zagaye na Aluminum a kan katako na katako / katako.

  • Sanya driers gefen da'irar aluminum, kiyaye samfuran bushe da tsabta.
  • Yi amfani da takarda filastik mai tsabta, shirya da'irar aluminum, kiyaye hatimi mai kyau.
  • Yi amfani da takardan fatar maciji, shirya saman takardar filastik, kiyaye hatimi mai kyau.
  • Na gaba, akwai hanyoyi guda biyu na marufi: Hanya ɗaya ita ce marufi na katako, ta amfani da ɓawon burodin da ke tattara saman; Wata hanya ita ce marufi na katako, ta yin amfani da akwati na katako shirya farfajiya.
  • Daga karshe, sanya bel na karfe a saman akwatin katako, kiyaye akwatin katako da sauri da tsaro.

Aluminum da'irar Henan Huawei Aluminum. hadu da fitarwa. Za a iya rufe fim ɗin filastik da takarda mai launin ruwan kasa a bukatun abokan ciniki. Menene ƙari, ana ɗaukar akwati na katako ko pallet na katako don kare samfuran daga lalacewa yayin bayarwa. Akwai nau'i biyu na marufi, waxanda suke ido da bango ko ido ga sama. Abokan ciniki za su iya zaɓar ɗayansu don dacewarsu. Gabaɗaya magana, akwai 2 ton a cikin fakiti ɗaya, da loading 18-22 ton a cikin akwati 1 × 20., kuma 20-24 ton a cikin akwati 1 × 40..

201871711520504

Me yasa zabar mu?

Domin tafiya da zamani, HWALU yana ci gaba da gabatar da yanayin kayan fasaha da fasaha don haɓaka gasa. Koyaushe riko da falsafar kasuwanci na inganci azaman cibiyar da abokin ciniki na farko, don samar da mafi kyawun samfuran da'irar diski na aluminum zuwa duk sassan duniya. Kara …