System Overview: 1050 অ্যালুমিনিয়াম সার্কেল/ডিস্ক (Aluminum Round Blank)

দ্য 1050 অ্যালুমিনিয়াম বৃত্ত (also known as Aluminum Disc) is a circular blank made from commercially pure aluminum (1000 সিরিজ). With high aluminum content (≥99.5%), it offers excellent formability and surface treatment capabilities, making it an essential raw material for deep-drawn products like cookware, আলোর ফিক্সচার, এবং প্যাকেজিং.

1. Core Identification: রচনা, মেজাজ, এবং স্পেসিফিকেশন

  1. রাসায়নিক রচনা & মান
    • Primary Standards: হেনান হুয়াওয়ে অ্যালুমিনিয়াম শিল্প অ্যালুমিনিয়াম সার্কেল রপ্তানি উত্পাদন 3190, ASTM B209, চালু 573.
    • মূল রচনা: অ্যালুমিনিয়াম (আল) content not less than 99.5%, with very low levels of impurities such as Silicon (এবং) and Iron (Fe). No alloying elements are intentionally added.
    • মূল বৈশিষ্ট্য: High purity with strict control over total impurities, ensuring excellent electrical conductivity, তাপ পরিবাহিতা, এবং জারা প্রতিরোধের.
  2. Common Supply Tempers
    • হে টেম্পার (অ্যানিলেড): Soft material with superior ductility, ideal for deep drawing and stamping​ processes (যেমন, pot stretching).
    • H14 / H18 টেম্পার (স্ট্রেন-কঠিন): Cold-worked for increased strength and hardness, with reduced elongation. Suitable for shallow forming or parts requiring higher rigidity.
  3. Typical Specification Range
    • পুরুত্ব: 0.3 মিমি - 10.0 মিমি
    • ব্যাস: 100 মিমি - 1650 মিমি (Custom sizes available)
    • সারফেস ফিনিশ: উজ্জ্বল, কল (satin), প্রলিপ্ত, ইত্যাদি.

8011 অ্যালুমিনিয়াম বৃত্ত

2. Key Properties and Characteristics

সম্পত্তি বিভাগ নির্দিষ্ট কর্মক্ষমতা
ভৌত বৈশিষ্ট্যআমি কম ঘনত্বের (~2.71 g/cm³), excellent electrical (~58% IACS) এবং তাপ পরিবাহিতা (~229 W/(m·K)).
জারা প্রতিরোধেরআমি একটি প্রাকৃতিক ফর্ম, protective oxide film in air, offering good corrosion resistance.
যান্ত্রিক বৈশিষ্ট্যআমি মাঝারি শক্তি, adjustable via cold working. ~95 MPa (হে মেজাজ), ~120 MPa (H14). Not heat-treatable.আমি
কর্মক্ষমতাআমি চমৎকার গভীর drawability, মুদ্রাঙ্কন, নমন, এবং ঢালাইযোগ্যতা (TIG preferred).​ Anodizes uniformly with a fine finish.

3. Primary Production Process

Aluminum Ingot → Melting & Continuous Casting into Slab → Hot/Cold Rolling to Gauge → Continuous Annealing (to control temper) → Slitting/Cross Cutting → CNC Punching/Shearing into Circles → Deburring, ক্লিনিং, Surface Treatment → Inspection & প্যাকেজিং.

4. সাধারণ অ্যাপ্লিকেশন

  • রান্নার জিনিস & বাসনপত্র: Non-stick cookware body/base, পাত্র, বেকিং শীট, kettle base, lids.
  • আলোকসজ্জা & বৈদ্যুতিক: LED বাতি প্রতিফলক, ছায়া, তাপ বেসিনে সাবস্ট্রেট, ক্যাপাসিটর হাউজিং.
  • প্যাকেজিং & Canisters: Food cans, ointment boxes, cosmetic cases, small chemical pails.
  • আলংকারিক & হার্ডওয়্যার: Badges, নামফলক, যন্ত্র প্যানেল, general structural components.

5. Comparison with Common Similar Alloys

খাদ Al Content Core Differences & বৈশিষ্ট্য Typical Application Preference
1050আমি ≥99.5% Best balance of purity and formability.​ Strict impurity control, excellent all-around workability, খরচ কার্যকর. Various deep-drawn cookware, রান্নাঘরের জিনিসপত্র, সাধারণ হার্ডওয়্যার.
1060আমি ≥99.6% তুলনায় সামান্য উচ্চ বিশুদ্ধতা 1050, offering better electrical/thermal conductivity at a slightly higher cost. বৈদ্যুতিক উপাদান, heat sinks where higher conductivity is critical.
3003আমি ~98% Aluminum-Manganese alloy.​ Significantly higher strength and corrosion resistance than 1050. Can be strengthened by cold working. রাসায়নিক পাত্রে, ducts, architectural trim requiring higher strength.