5083 Aluminum Disc Overview

The 5083 aluminum wafer is made of aluminum alloy (high-magnesium alloy). It has good physical properties. It has good strength, strong corrosion resistance, and good machinability among non-heat-treatable alloys. Even in the water alloy, the strength and corrosion resistance are the highest.

5083 Aluminum Circle Specification:

  • temper available O H12 H14 H16 H18.
  • application: cookware utensil and basin.
  • thickness: 0.3-5.0mm.(+/-0.02mm)
  • diameter: 120-1360mm.(+/-0.5mm)
  • production treatment: cold rolled or hot rolled.
  • surface appearance: flat clean surface no whole, scratch, oil dirty and oxidation.
  • cutting edge: neat cutting edge no burrs.

aluminum circle

The Density Of 5083 Aluminum Sheet 

The density of 5083 aluminum alloy is relatively small, and many 5083 wafer products are very light. They are more convenient to use than immortal steel products. It is currently the most widely used anti-rust aluminum in the market. This alloy has high strength, high plasticity, and corrosion resistance of the metal, so the produced product will not easily deform, but the plasticity is still good when hardened by semi-cold work, and the plasticity is low when hardened by cold work.

5083 Aluminum Alloy Circle Characteristics

  • Strength, good machinability
  • Strong corrosion resistance
  • The surface is beautiful after anodization.
  • Excellent corrosion resistance
  • Good cold workability
  • Weldability(Whether using gas welding, arc welding, or contact spot welding and welding wire, 5083 aluminum wafers can show good weldability)

Applicable scene

·For  turkey barrels, aluminum circle for traffic sign

·For aluminum vessels circles, pot pans

Properties of the aluminum circle:

Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics:

  • Low anisotropy, which facilitates deep drawing
  • Strong mechanical properties
  • High and homogeneous heat diffusion
  • Ability to be enameled, covered by PTFE (or others), anodized
  • Good reflectivity
  • High strength-to-weight ratio
  • Durability and resistance to corrosion

Aluminum Circles Process

Ingot/Master Alloys — Melting Furnace – Holding Furnace — D.C. Caster — Slab —- Scalper — Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace — Final Inspection – Packing — Delivery

  • Prepare the master alloys
  • Melting furnace: put the alloys into the melting furnace
  • D.C.cast aluminum ingot: To make the mother ingot
  • Mill the aluminum ingot: to make the surface and side smooth
  • Heating furnace
  • Hot rolling mill: made the mother coil
  • Colding rolling mill: the mother coil was rolled as the thickness you want to buy
  • Punching process: become the size what you want
  • Annealing furnace: change the temper
  • Final inspection
  • Packing: wooden case or wooden pallet
  • Delivery

Quality Control

Assurance Below inspection will be done in the production.

  • a. ray detection—RT;
  • b. ultrasonic testing—UT;
  • c. Magnetic Particle Testing-MT;
  • d. penetration testing-PT;
  • e. eddy current flaw detection-ET

1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.

2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.

Aluminum discs packing:

Aluminum circles can be packed by export standards, covering with brown paper and plastic film. Finally, the Aluminium Round is fixed on a wooden pallet/wooden case.

  • Put the driers side the aluminum circle, keep the products dry and clean.
  • Use clean plastic paper, pack the aluminium circle, keep good sealing.
  • Use the snakeskin paper, pack the surface of the plastic paper, keep good sealing.
  • Next, there are two ways of packaging: One way is wooden pallet packaging, using the crusty paper packing the surface; Another way is wooden case packaging, using the wooden case packing the surface.
  • Finally, lay the steel belt on the wooden box’s surface, keeping the wooden box fastness and secure.

Aluminum circle of Henan Huawei Aluminum. meet the export standard. Plastic film and brown paper can be covered at customers’ needs. What’s more, a wooden case or wooden pallet is adopted to protect products from damage during delivery. There are two kinds of packaging, which are eye to wall or eye to the sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.


Why choose us?

In order to move with the times, HWALU keeps introducing the state of the art equipment and technique to improve its competitiveness. Always adhere to the business philosophy of quality as the center and customer first, to provide the highest quality aluminum disc circle series products to all parts of the world. More …