Yi zaman kome, M, da kuma samar da aikin da aka yi amfani da su a cikin masana'antar hasken wuta

Aluminum reflector Disc don haske ya zama ɗaya daga cikin mafi mahimmancin albarkatun ƙasa a cikin samar da fitilu na zamani saboda haɗuwa da babban abin nunawa, mai kyau m, da kuma yanayin tsinkaya. Waɗannan kaddarorin sun ƙayyade ba kawai ingancin gani na luminaire na ƙarshe ba amma har ma da kwanciyar hankali na aiki yayin juyi, yin hatimi, ko zane mai zurfi. Kamar yadda masana'antun ke bibiyar sifofi masu sauƙi da aiki mai haske, zaɓin fayafai na aluminum ya zama ƙarar fasaha da ƙayyadaddun bayanai.

aluminum-reflector-disc-don-lighting-1

1. Tunani na Sama da Ƙarfafawar gani

Tunani shine ainihin halayen aiki don aikace-aikacen haske. Aluminum fayafai, musamman wadanda aka yi daga 1050, 1060, kuma 1100 gami, suna ba da fa'idodi na gani saboda tsaftarsu da tsaftataccen nau'in ƙarfe.

Mabuɗin Abubuwan Da Suka Shafi Tunani

  • Surface m (Ra): Ƙarƙashin ƙazanta yana ƙara tunani na musamman.
  • Alloy Tsarkake: Haɗaɗɗen tsaftataccen tsafta yana rage ƙananan lahani waɗanda ke watsa haske.
  • Yanayin Jin zafi: O-state yana inganta daidaito yayin gogewa.
  • Ƙarshen Sama: Gyaran madubi, anodizing, kuma jiyya mai haske yana haɓaka daidaituwar gani.
  • Ingancin Layer Oxide: A barga anodized fim hana hadawan abu da iskar shaka-jawo asarar reflectivity.

Tebur 1. Matsakaicin Matsakaicin Watsawa don Fayafai na Aluminum-Mai Haske

Alloy Yanayin saman Yi zaman kome (Na musamman) Aikace-aikacen Haske na gama gari
1050 goge / Anodized 83-87% Na cikin gida reflectors, downlights
1060 An Kammala madubi 87-92% Matsakaicin inganci mai inganci, LED modules
1100 Haskaka-Mayya 80-85% Lampshades na gaba ɗaya
3003 Mill Gama 75-82% Heat-resistant reflectors

Ƙarshen madubi na musamman ana amfani dashi sosai a cikin fitilun high-bay na LED, na'urorin hasken wuta na kasuwanci, da kuma gine-gine reflectors.

2. Ƙarfafawa da Halayen Zurfin Zane

Ductility yana ƙayyade ko diski na aluminum zai iya jurewa babban nakasar filastik ba tare da tsagewa ba. Gidajen hasken wuta da masu haskakawa galibi suna buƙata:

  • Zane mai zurfi har zuwa 40-60% nakasawa
  • Multi-pass kadi a sarrafawa gudu
  • Rarraba nau'ikan iri don guje wa filaye-bawon lemu

Abubuwan Da Ke Haɓaka Ductility

  1. Jihar Annealing (O-jihar):
    Yana ba da ƙananan tauri da tsayin tsayi.
  2. Sarrafa Girman Hatsi:
    Kyawawan hatsi masu kyau da iri ɗaya suna rage matsananciyar damuwa.
  3. Tsarkakewa da Abubuwan Haɗawa:
    Alloys kamar 1050/1060 suna da ƙaramar alloying ƙari, inganta haɓaka rates.
  4. Rage Ragi a cikin Rolling:
    Yana rinjayar samuwar rubutu da anisotropy.

Tebur 2. Kayayyakin Injini na Fayafai na Fitilar Aluminum na gama-gari

Alloy Mai fushi Ƙarfin Ƙarfin Ƙarfi (MPa) Tsawaitawa (%) Ƙimar Ƙarfafawa
1050 O 60–95 30–40 M
1060 O 65–100 28–38 M
1100 O 70-110 25-35 Da kyau sosai
3003 O 95-130 20–30 Yayi kyau

Waɗannan kaddarorin kai tsaye suna ƙayyade ko hadaddun siffofi na geometric-kamar masu nuna alamun parabolic ko gidaje masu zurfi na cylindrical-za a iya kafa su ba tare da fashewa ko wrinkling ba..

aluminum-mai nuna-disk-for-walƙiya-2

3. Ƙirƙirar Ayyuka a Masana'antar Haske

Halin ƙirƙirar fayafai na aluminum yana da mahimmanci a samar da hasken masana'antu inda aka tsara abubuwan da aka gyara ta amfani da matakai kamar:

  • Karfe kadi
  • Zane mai zurfi
  • Tambari
  • Hydroforming
  • Matsi yana tasowa

1. Ayyukan Karfe Kadi

Fayafai na Aluminum tare da babban ductility da kuma nunin rarraba hatsi iri ɗaya:

  • Santsi kwarara yayin juyi
  • Karamin girgizar ƙasa
  • Rage haɗarin tsagewar gefe
  • Tsayayyen sarrafa geometric a cikin sifofin parabolic da conical

Masu haskaka haske galibi suna buƙatar ci gaban ƙasa mara aibi don haɓaka aikin gani.

2. Zurfin Zane da Ƙirƙirar Latsa

Alamun ayyuka sun haɗa da:

  • Iyakance Rabo Zane (LDR) tsakanin 2.0-2.3 don tsantsa aluminum
  • Ƙananan halin kunne saboda sarrafa mirgina rubutu
  • Bargawar farfadowa a lokacin annealing

Wadannan halaye suna tabbatar da cewa diski zai iya zama cikin zurfin tunani mai zurfi ko hadaddun ba tare da lahani ba.

aluminum-reflector-disc-for-lighting-4

3. Daidaitawar Maganin Anodizing da Surface

Masu haskaka walƙiya suna buƙatar daidaitaccen bayyanar kyan gani. Aluminum fayafai dole ne su bayar:

  • Amsar anodizing mai inganci
  • Sautin launi na Uniform
  • Juriya ga canza launin thermal
  • Ƙarfin mannewa na yadudduka masu haske

Waɗannan halayen suna haɓaka duka dorewa da kwanciyar hankali na na'urar hasken wuta.

4. Fa'idodin Gudanar da Zafi da Ƙarfafa Zafi

Baya ga tunani, Fayafai na aluminium suna ba da gudummawa ga sarrafa thermal - muhimmin mahimmanci a cikin hasken LED.

Fa'idodi sun hada:

  • High thermal watsin (kusan. 200-235 W/m·K)
  • Saurin zubar da zafi daga kwakwalwan LED
  • Rage nakasar thermal
  • Ingantacciyar rayuwa na samfuran LED

Wannan ya sa aluminum ya fi dacewa da bakin karfe ko mai rufi, wanda ke ba da ingantaccen yanayin thermal.

aluminum-reflector-disc-for-lighting-3

5. Aikace-aikace a Gaba ɗaya Bangaren Haske

Ana amfani da fayafai na aluminum a ciki:

  • LED reflectors
  • Hasken haske
  • Hasken haske da hasken waƙa
  • High-bay masana'antu reflectors
  • luminaires na gine-gine
  • Gidajen fitilar waje
  • Parabolic da conical reflectors

Haɗin su na aikin gani da injina yana tallafawa tsarin hasken wuta na aiki da kayan ado.

Ƙarshe

Matsayin haske aluminum reflector Disc don haske kayan sadar da wani na kwarai ma'auni na reflectivity, m, da samar da aiki. Microstructure mai sarrafawa, babban tsarkakakku, da dacewa tare da ci-gaba da tsarin ƙarewa ya sa waɗannan fayafai su zama makawa a cikin masana'anta na zamani da masana'antar fitila. Daga tsarin fitilun kasuwanci zuwa manyan masu haskaka LED masu inganci, aluminum fayafai ci gaba da saita ma'auni na masana'antu don aikin gani da haɓakawa.

 

Abubuwan da'irar aluminum:

Aluminum da'irar ya dace da kasuwanni da yawa, ciki harda kayan girki, masana'antun kera motoci da haske, da dai sauransu., godiya ga kyawawan halaye na samfur:

  • Ƙananan anisotropy, wanda ke sauƙaƙe zane mai zurfi
  • Strong inji Properties
  • Babban kuma daidaituwa zafi watsawa
  • Ability don enameled, rufe da PTFE (ko kuma wasu), anodized
  • Kyakkyawan tunani
  • Babban ƙarfi-zuwa nauyi rabo
  • Dorewa da juriya ga lalata

Tsarin Da'irar Aluminum

Ingot/Master Alloys — Narka wutar makera - Riƙe wutar makera — D.C. Caster — Wuri —- Scalper — Dandalin Rolling Hot - Mill Rolling Mill - Punching - Annealing Furnace — Binciken Ƙarshe - Shiryawa — Bayarwa

  • Shirya babban allo
  • Narka wutar makera: sanya gami a cikin tanderun narkewa
  • DC watsa aluminum aluminum: Don sa uwar ingot
  • Rufe murfin aluminum: don yin farfajiya da gefen santsi
  • Tanderun dumama
  • Abin birgima: ya sanya uwar murɗa
  • Colding mirgina niƙa: an mirgine murfin uwa azaman kaurin da kuke son siyan
  • Tsarin bugun: zama girman abin da kuke so
  • Ƙona wutar makera: canza yanayin
  • Binciken ƙarshe
  • Shiryawa: akwati na katako ko pallet na katako
  • Bayarwa

Ikon Kulawa

Tabbatarwa da ke ƙasa dubawa za a yi a cikin samarwa.

  • a. gano hasken haske—RT;
  • b. ultrasonic gwaji—UT;
  • c. Gwajin Magnetic Barbashi-MT;
  • d. gwajin shiga-PT;
  • e. Gano aibi na yanzu-ET

1) Ka zama 'yanci daga Tabon Mai, Haushi, Hada, Scratches, Tabo, Discoloration Oxide, Karya, Lalata, Roll Marks, Datti Streaks, da sauran lahani waɗanda zasu kawo cikas ga amfani.

2) Surface ba tare da layin baki ba, yanke tsafta, tabo na lokaci-lokaci, nadi bugu lahani, kamar sauran ka'idojin Gudanar da ciki na gko.

Aluminum fayafai shiryawa:

Za a iya tattara da'irar aluminium ta ma'aunin fitarwa, sutura da takarda mai launin ruwan kasa da fim ɗin filastik. Daga karshe, An gyara zagaye na Aluminum a kan katako na katako / katako.

  • Sanya driers gefen da'irar aluminum, kiyaye samfuran bushe da tsabta.
  • Yi amfani da takarda filastik mai tsabta, shirya da'irar aluminum, kiyaye hatimi mai kyau.
  • Yi amfani da takardan fatar maciji, shirya saman takardar filastik, kiyaye hatimi mai kyau.
  • Na gaba, akwai hanyoyi guda biyu na marufi: Hanya ɗaya ita ce marufi na katako, ta amfani da ɓawon burodin da ke tattara saman; Wata hanya ita ce marufi na katako, ta yin amfani da akwati na katako shirya farfajiya.
  • Daga karshe, sanya bel na karfe a saman akwatin katako, kiyaye akwatin katako da sauri da tsaro.

Aluminum da'irar Henan Huawei Aluminum. hadu da fitarwa. Za a iya rufe fim ɗin filastik da takarda mai launin ruwan kasa a bukatun abokan ciniki. Menene ƙari, ana ɗaukar akwati na katako ko pallet na katako don kare samfuran daga lalacewa yayin bayarwa. Akwai nau'i biyu na marufi, waxanda suke ido da bango ko ido ga sama. Abokan ciniki za su iya zaɓar ɗayansu don dacewarsu. Gabaɗaya magana, akwai 2 ton a cikin fakiti ɗaya, da loading 18-22 ton a cikin akwati 1 × 20., kuma 20-24 ton a cikin akwati 1 × 40..

201871711520504

Me yasa zabar mu?

Domin tafiya da zamani, HWALU yana ci gaba da gabatar da yanayin kayan fasaha da fasaha don haɓaka gasa. Koyaushe riko da falsafar kasuwanci na inganci azaman cibiyar da abokin ciniki na farko, don samar da mafi kyawun samfuran da'irar diski na aluminum zuwa duk sassan duniya. Kara …