1060 Aluminum Circle 1060 aluminum alloy is one of the 1000 series aluminum alloys, and the 1060 series aluminum wafer means that the aluminum content of the wafer must be more than 99.6%. The aluminum circle aluminum disc is one of the deep-processing products of the aluminum sheet&plate. Aluminum Circle is called aluminum disk, aluminum cake, aluminum dicks, aluiminum round plate, aluminum disc, and alu ...
Cold Rolled Aluminium Disc Circle Overview Cold-rolled aluminum wafer refers to the use of hot-rolled aluminum coil as raw material. After surface treatment, the metal is cold-rolled below the recrystallization temperature. The finished product is a hard-rolled coil. In this way, the hardness of the aluminum wafer can be improved. , But it will also be accompanied by deterioration of metal plasticity. Aluminum ...
5083 Aluminum Disc Overview The 5083 aluminum wafer is made of aluminum alloy (high-magnesium alloy). It has good physical properties. It has good strength, strong corrosion resistance, and good machinability among non-heat-treatable alloys. Even in the water alloy, the strength and corrosion resistance are the highest. 5083 Aluminum Circle Specification: temper available O H12 H14 H16 H18. application: ...
1 Series Pure Aluminum Disc Circle Overview 1 series of aluminum means pure aluminum, which contains no less than 99% aluminum. 1000 series aluminum wafers are also called pure aluminum wafers. The common models are 1050 1060 1070 1000 1200 series, in all In the aluminum alloy series, the 1000 series belongs to the series with the most aluminum content. And because the 1 series aluminum does not contain other He ...
5754 Alloy Aluminum Circle Chemical Composition: Chromium (CR) 0.15-0.35% Copper (Cu) 0.1% max Magnesium (Mg) 2.2-2.8% Manganese (Ms) 0.1% max Silicon (Si) & Iron (Fe) 0.45% max Zinc (Zn) 0.1 max 5754 Aluminum Circle Specification Tolerances Blanked and Sheared Circle Products Thickness(mm) Diameter Range (D)(mm) 0.5-4.5 D ≤ 455 455< D ≤ ...
3003 Aluminum Disc Circles Overview 3003 aluminum alloy is an aluminum-manganese alloy. The main alloying element is manganese. It is the most widely used anti-rust aluminum. The strength of this alloy is not high, but it is higher than general industrial pure aluminum. It cannot be strengthened by heat treatment. Generally, cold working methods are used. To improve its mechanical properties. It has high plastic ...
Aluminum Disc Circle For Kettle Overview The aluminum circle disc is a kind of preliminary processing form of aluminum products. After processing, it has good characteristics and is widely used in our daily lives. One of the common uses is that aluminum wafers are used to make kettles. Aluminum disc circle for kettle has many excellent characteristics, such as 1. Excellent elongation and tensile strength; 2. ...
After the aluminum alloy circle disc is rolled and annealed, the crystallographic orientation of the particles will change to a certain extent, and the mandrel coordinates will deviate. This deviation will stabilize with the amount of deformation or the degree of recrystallization during the rolling process. At this time, the part of the aluminum sheet that forms a different angle with the rolling direction will ...
Why 5052 aluminum circle can be used for reflective sign boards? 5052 aluminum circle with deep drawing quality, good spinning quality, excellent forming and anodizing, no four ears,ect advantages are widely used for reflective sign boards. 5052 aluminum circle belong to 5000 series aluminun circle/aluminium wafer,at the same time including:5005 aluminium circle,5754 aliuminium disk,5083 aluminium discs. ...
About the 5 major advantages of aluminum discs As we all know, there are many aluminum discs in our lives, but we don't notice them. There are also many types of aluminum discs, such as the kettles, cups, etc. we often use, and the kitchen utensils we use. For example, the most common lamps, tableware, lampshades, etc. in our lives are all made of aluminum discs. But you may not know about the advantages of alum ...
We use the finest raw material to improve the product quality, It is normal with thickness from 0.3mm--10mm, diameter from 100mm-800mm,guaranteeing the quality of our aluminum round circles lives to national standards. On the other hand,we are based on Advanced production equipment and superb production technology. Aluminum wafer open-book blanking production line main equipment are: feeding trolley, uncoiler, ...